Finite Element Analysis of the Surface Mounted Permanent Motor Without Stator Excitation

Authors

  • Qurban Ali Shah Syed Department of Electrical Engineering, The University of Larkano, Larkana Author
  • Zahid Muhammad Department of Electrical Engineering, Isra University, Hyderabad Author
  • Kamran Ahmed Samo Department of Electrical Engineering, The University of Larkano, Larkana Author

DOI:

https://doi.org/10.57041/4ssjeg12

Keywords:

BLDC motor, electrical machines, electro-mechanical conversion, finite element analysis, no-load analysis, permanent magnet (PM), SPM motor

Abstract

This paper presents an electromagnetic analysis of the brushless DC (BLDC) surface-mounted permanent magnet (SPM) motor using 2D finite element analysis (FEA). The no-load characteristics of the three-phase BLDC SPM motor are numerically computed, and the results are analysed in detail. The back EMF waveform of the three-phase BLDC SPM motor is computed when stator windings are not supplied with current, and its harmonic analysis is carried out using the fast Fourier transform (FFT). The cogging torque is computed without stator current excitation. The no-load electromagnetic results are discussed to analyse their influence on the performance of the three-phase BLDC SPM motor.

Downloads

Published

2025-12-30

Issue

Vol. 4 No. 2 (2025): International Journal of Emerging Engineering and Technology (IJEET)

Section

Articles

License

Copyright (c) 2025 https://grsh.org/journal1/index.php/ijeet/cr

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

How to Cite

Finite Element Analysis of the Surface Mounted Permanent Motor Without Stator Excitation. (2025). International Journal of Emerging Engineering and Technology, 4(2), 10-14. https://doi.org/10.57041/4ssjeg12

Similar Articles

11-17 of 17

You may also start an advanced similarity search for this article.